1800 WOOD INSERT

1800 WOOD INSERT

Like their cousins in the 1800/2200 freestanding series, the 1800 series inserts offer the same tried-and-tested architecture and the same great features, including a magnificent view of the fire through the bay window. They are also equipped with a powerful blower, transforming your old, inefficient fireplace into a highly effective heating system.

The 1800 series insert is both practical and elegant, and is a perfect choice for your living room or basement fireplace.

94% of the last 50 homeowners who have registered their warranty are satisfied with this product.

APPLIANCE PERFORMANCE (1)

Fuel type : Dry cordwood
Recommended heating area (sq.ft.) : () 500 – 1,800
Firebox volume (cu. ft.) : 1.8
Maximum burn time : () 6 h
Maximum heat output (dry cordwood) : (2) 65,000 BTU/h (19.0 kW)
Overall heat output rate (min. to max.) : (2) (3) 9,700 BTU/h (2.8 kW) to 36,300 BTU/h (10.6 kW)
Average overall efficiency (EPA cribs / Douglas fir) :(3) 66.0 % (HHV) (4) 71.0 % (LHV) (5)
Average overall efficiency (dry cordwood) : (3) N.A. (HHV) (4) N.A. (LHV) (5)
Optimum efficiency : (6) (7) 75 %
Average particulate emissions rate : (8) 2.8 g/h
Average CO : (9) N.A.

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) This appliance is officially tested and certified by an independent agency.

(9) Carbon monoxyde.

GENERAL FEATURES

Adjustable threaded legs Yes
Stainless-steel secondary-air system improving gas combustion Yes
Automatic or manual adjustment of combustion air supply Yes
Maximum log length 16″
Log positioning Over width
Chimney diameter 6″
Minimum chimney height (feet) 15′
Baffle type C-Cast
Approved for a mobile home installation No
Weight 307 lb (139 kg)
Door type Single, glass with steel frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 22 3/4” X 9 3/8”
Glass air-wash system Yes
Premium quality blower included (CFM) 90
Overall dimension (Height) 20 3/8”
Overall dimension (Width) 30”
Overall dimension (Depth) 25 3/8”
Door opening – dimension (Height) 8 1/2”
Door opening – dimension (Width) 18 3/8”
Firebox – dimension (Height) 11 1/2”
Firebox – dimension (Width) 16 7/8”
Firebox – dimension (Depth) 14 5/8”
Firebox lined with refractory bricks for better heat distribution Yes
Steel thickness – body 3/16″
Steel thickness – top 5/16″
Centre line of flue outlet to the side 10 3/4”
Centre line of flue outlet to the back 4 5/8”
Fireplace opening – minimum (Height) 20″
Fireplace opening – minimum (Width) 23 3/8″
Fireplace opening – minimum (Depth) 14 5/8″
USA standard (emissions) EPA
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482
Canadian standard (safety) ULC S628
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime

Recent Entries