1600 WOOD INSERT

1600 WOOD INSERT

With its compact design, the 1600 insert can be installed in a fireplace as small as 14 3/8” deep. Even so, it offers a performance of up to 65,000 BTU/hr and burns 17” logs.

The standard 130-CFM blower helps maximize the stove’s energy performance and the very low emission rate, even at normal operating temperatures, makes the 1600 insert an excellent choice for those seeking an environmentally friendly but ultra-efficient source of heat.

98% of the last 50 homeowners who have registered their warranty are satisfied with this product.

APPLIANCE PERFORMANCE (1)

Fuel type : Dry cordwood
Recommended heating area (sq.ft.) : () 500 – 1,800
Firebox volume (cu. ft.) : 2.0
Maximum burn time : () 6 h
Maximum heat output (dry cordwood) : (2) 65,000 BTU/h (19.0 kW)
Overall heat output rate (min. to max.) : (2) (3) 11,800 BTU/h (3.5 kW) to 42,400 BTU/h (12.4 kW)
Average overall efficiency (EPA cribs / Douglas fir) :(3) 68.0 % (HHV) (4) 73.0 % (LHV) (5)
Average overall efficiency (dry cordwood) : (3) N.A. (HHV) (4) N.A. (LHV) (5)
Optimum efficiency : (6) (7) 80 %
Average particulate emissions rate : (8) 4.44 g/h
Average CO : (9) N.A.

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) This appliance is officially tested and certified by an independent agency.

(9) Carbon monoxyde.

GENERAL FEATURES

Adjustable threaded legs Yes
Stainless-steel secondary-air system improving gas combustion Yes
Automatic or manual adjustment of combustion air supply Yes
Maximum log length 17”
Log positioning Over width
Chimney diameter 6″
Minimum chimney height (feet) 12′
Baffle type C-Cast
Approved for a mobile home installation No
Weight 378 lb (172 kg)
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 15” x 8 3/8”
Glass air-wash system Yes
Premium quality blower included (CFM) 130
Overall dimension (Height) 22 5/8”
Overall dimension (Width) 25 7/8”
Overall dimension (Depth) 26”
Door opening – dimension (Height) 8 1/2”
Door opening – dimension (Width) 15 5/8”
Firebox – dimension (Height) 12 7/8”
Firebox – dimension (Width) 18 1/8”
Firebox – dimension (Depth) 14 3/4”
Firebox lined with refractory bricks for better heat distribution Yes
Steel thickness – body 3/16″
Steel thickness – top 5/16″
Centre line of flue outlet to the side 12 1/8”
Centre line of flue outlet to the back 6”
Fireplace opening – minimum (Height) 22 5/8
Fireplace opening – minimum (Width) 26 3/8″
Fireplace opening – minimum (Depth) 14 3/8″
USA standard (emissions) EPA
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482, UL 907
Canadian standard (safety) ULC S628
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime

Recent Entries