OB01151 1100 WOOD INSERT

1100 WOOD INSERT

The 1100 insert is the ready-made solution for smaller stone fireplaces. With its back face at a 45° angle, it offers a wide range of configurations.The floor of its firebox is 2.5 inches deep, allowing greater accumulation of ashes and cleaner use.

The 1100 insert also comes with a powerful 144 CFM blower. You’ll be amazed and delighted by the 50,000 BTU/h of heat it provides!

94% of the last 50 homeowners who have registered their warranty are satisfied with this product.

Specs

Fuel type : Dry cordwood
Recommended heating area (sq.ft.) : () 250 – 1,400
Firebox volume (cu. ft.) : 1.5
Maximum burn time : () 6 h
Maximum heat output (dry cordwood) : (2) 50,000 BTU/h (14.6 kW)
Overall heat output rate (min. to max.) : (2) (3) 11,000 BTU/h (3.2 kW) to 35,000 BTU/h (10.2 kW)
Average overall efficiency (EPA cribs / Douglas fir) :(3) 70.0 % (HHV) (4) 75.0 % (LHV) (5)
Average overall efficiency (dry cordwood) : (3) N.A. (HHV) (4) N.A. (LHV) (5)
Optimum efficiency : (6) (7) 75 %
Average particulate emissions rate : (8) 2.9 g/h
Average CO : (9) N.A.

(1) Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.

(2) The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.

(3) As measured per CSA B415.1-10 stack loss method.

(4) Higher Heating Value of the fuel.

(5) Lower Heating Value of the fuel.

(6) Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.

(7) Optimum overall efficiency at a specific burn rate (LHV).

(8) This appliance is officially tested and certified by an independent agency.

(9) Carbon monoxyde.

GENERAL FEATURES

Adjustable threaded legs Yes
Stainless-steel secondary-air system improving gas combustion Yes
Automatic or manual adjustment of combustion air supply Yes
Maximum log length 17”
Log positioning Over width
Chimney diameter 6″
Minimum chimney height (feet) 15′
Baffle type C-Cast
Approved for a mobile home installation No
Weight 297 lb (135 kg)
Door type Single, glass with cast iron frame
Glass type Ceramic glass
Glass surface – dimensions (Width X Height) 15” X 8 3/8”
Glass air-wash system Yes
Premium quality blower included (CFM) 144
Overall dimension (Height) 21 1/8”
Overall dimension (Width) 25 1/2”
Overall dimension (Depth) 22 1/4”
Door opening – dimension (Height) 8 3/8”
Door opening – dimension (Width) 15 5/8”
Firebox – dimension (Height) 11 1/2”
Firebox – dimension (Width) 18 1/8”
Firebox – dimension (Depth) 12 5/8”
Firebox lined with refractory bricks for better heat distribution Yes
Steel thickness – body 3/16″
Steel thickness – top 3/16″
Centre line of flue outlet to the side 12”
Centre line of flue outlet to the back 3 7/8”
Fireplace opening – minimum (Height) 21 3/4″
Fireplace opening – minimum (Width) 26″
Fireplace opening – minimum (Depth) 12 7/8″
USA standard (emissions) EPA Method 28
Canadian Standard (emissions) CSA B415.1-10
USA standard (safety) UL 1482
Canadian standard (safety) ULC S628
Tested and listed as per applicable standards By an accredited laboratory (CAN/USA)
Warranty Limited lifetime

Recent Entries